Wood composite railing has always been a wood plastic product vigorously developed by Nanjing Xuhua Sundi New Building Materials Co., Ltd. in recent years. It is very popular in the market because of its environmental protection and corrosion resistance. Do you know how to install and clean wood composite railings? Today we'll give you a brief introduction about the installation and cleaning of wooden composite railings.
1. Because of the high density of the wood composite railing itself, the position of the self-tapping screw should be fixed by drill head and then by a self-tapping screw.
2. If the requirement for safety performance is high, plug-side steel can be added to the cavity of A and C wood-plastic profiles. Steel requirements and wood-plastic materials should be fixed with a self-tapping screw. In addition, the steel used should have the rust-proof treatment.
3. The spacing of guardrail is not more than 1.5 meters per span.
4. Avoid the impact or collision of heavy objects during the process of using. In the process of storage, transportation and installation of materials, please pay attention to proper handling, so as to avoid falling from high places.
It is suggested that the wood composite railings be cleaned regularly to prevent dust accumulation or various stains, which will be more difficult to remove after a long time. If there is a stain on the wood composite railings and it is uncertain that some cleaning methods can be used to remove it well, it is suggested to clean a small part of the stained area of the wood composite railings as a test to prevent excessive color difference on the ground. If the effect is good, you can use this method to remove other stained areas next. The tap can be used to wash the dust, dirt and soil of the wood composite railings directly.